RAMSEY RE34.9
3.56 Tonne DC Electric Winch (12v or 24v)
For General Recovery WorkHeavy duty electric DC winch. Rugged construction and low profile design enables fitting almost flush with, or above, the vehicle floor as required.
A 90mm x 215mm deep flange drum with rope anchor wedge ensures good rope life expectancy.
COMPLIANT WITH EN 14492-1 REGULATIONS
• 3560kgf line pullRated line pull of 34.9 kN• Emergency stop switch & safety solenoid
Ensures shut down if control solenoid fails to open
• Load limiting switch
Pre set to provide mechanical overload protection
• Worm & wheel drive - holds load safely• RAM-LOK freespool clutch mechanism
Spring loaded for positive engagement
• Wedge pocket rope anchor on drum
Major safety benefit - prevents rope release from drum
• 10mm x 23m (1960Nmm2 grade) wire rope
6 x 36 wire core construction for maximum flexibility
• Heavy duty series wound motor
12v and 24v models available
• All gearing running in oil bath
• Heavy duty roller guides
Industrial design for rugged commercial use
• Heavy duty wanderlead control
Industrial quality three-button with 4.5m lead
• Low amperage draw
Practical and obtainable at rated line pull
BHW Group Limited
Head Office: Lismirrane Industrial Park, Elstree Road Elstree, Herts WD63EE
RED: 30 Hawkes Drive, Heathcote Industrial Estate, Warwick CV34 6LX
Powered by: FIR TREE DESIGN E:
info@firtreedesign.com www.firtreedesign.com
VAT No. 301 7915 80 Company Reg. No. 1342461
Registered Office: Lismirrane Industrial Park, Elstree Road, Elstree, Herts WD63EE
Tel: 0208 953 6050
or 01482 223 663